PRODUCTS
EJ Coatings works with the best uppliers in the corrosion remediation business.
CHLOR*RID SALT REMOVER
The protective coating industry and corrosion engineers are more aware than ever before of the damage that can be caused by salt contamination.
Soluble salts, like chlorides and sulfates, are found on surfaces everywhere. These salts pull moisture from the air, causing protective coatings to fail. They can also be the cause at degradation of the substrate. Left unchecked, the surface contamination can corrode into deep pockets, making decontamination even more important and challenging. Lost productivity from protective coating failures are costly, and the failures can be hazardous.
CHLOR*RID is a unique, patented, organic bonding chemistry which aids in the removal of chlorides, sulfates and surface reacted salts. It removes these in a simple dilution with any portable water source. CHLOR*RID is the easiest and most economical way to remove soluble salt contaminants with any method -- high-pressure washing, wet abrasive blasting, or hand-cleaning. It is biodegradable, non-flammable, and contains no volatile organic compounds. Using CHLOR*RID during coating procedures reduces costly coating failures and corrosion rates -- simply, safely and economically. Laboratory and field tests confirm that it is effective on most industrial surfaces, including steel, foam, concrete and plastics. It has been used by private industry, for federal and state highway coating and cleaning projects, to wash dams, tanks, bridges and machinery, even in a microbiological lab.
When specifications require a consistency, we also use CHLOR*TEST for safe and reliable testing for chloride contamination,. Field test inspectors around the world will use this innovative product with confidence on virtually any surface at any angle. Imagine, a field test that is easy to use, yet more reliable than any other chloride testing method. CHLOR*TEST contains five (5) individual tests and can be used on vertical, horizontal or overhead surfaces. It was developed for ease of use and to prevent outside and cross contamination. The components are pre-measured to ensure accurate results in parts per million and micrograms per square centimeter. No temperature correction is needed between 41 Fahrenheit and 176 Fahrenheit. CHLOR*TEST is Revolutionary! It is actually easy to use and yet is more reliable than any other chloride testing method. With CHLOR*TEST, an inspector will never need a hypodermic needle or syringe, deionized water, cotton balls, tweezers, latex gloves, calculator, adhesive tape, measuring devices, working containers, conversion charts, or reagent again!
Welcome to visit: http://www.chlor-rid.com
CHLOR*RID is a unique, patented, organic bonding chemistry which aids in the removal of chlorides, sulfates and surface reacted salts. It removes these in a simple dilution with any portable water source. CHLOR*RID is the easiest and most economical way to remove soluble salt contaminants with any method -- high-pressure washing, wet abrasive blasting, or hand-cleaning. It is biodegradable, non-flammable, and contains no volatile organic compounds. Using CHLOR*RID during coating procedures reduces costly coating failures and corrosion rates -- simply, safely and economically. Laboratory and field tests confirm that it is effective on most industrial surfaces, including steel, foam, concrete and plastics. It has been used by private industry, for federal and state highway coating and cleaning projects, to wash dams, tanks, bridges and machinery, even in a microbiological lab.
When specifications require a consistency, we also use CHLOR*TEST for safe and reliable testing for chloride contamination,. Field test inspectors around the world will use this innovative product with confidence on virtually any surface at any angle. Imagine, a field test that is easy to use, yet more reliable than any other chloride testing method. CHLOR*TEST contains five (5) individual tests and can be used on vertical, horizontal or overhead surfaces. It was developed for ease of use and to prevent outside and cross contamination. The components are pre-measured to ensure accurate results in parts per million and micrograms per square centimeter. No temperature correction is needed between 41 Fahrenheit and 176 Fahrenheit. CHLOR*TEST is Revolutionary! It is actually easy to use and yet is more reliable than any other chloride testing method. With CHLOR*TEST, an inspector will never need a hypodermic needle or syringe, deionized water, cotton balls, tweezers, latex gloves, calculator, adhesive tape, measuring devices, working containers, conversion charts, or reagent again!
Welcome to visit: http://www.chlor-rid.com
This website's content Copyright © EJ Coatings Pte Ltd
Website Designed By Elves Lab
Website Designed By Elves Lab